Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2011 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CEL Reset 900

Hi Folks,

What is the proper procedure to reset the CEL in my 94 945?

I tried this sequence with no joy. ??? Did not get a flashing CEL. Or maybe this sequence is for the service engine light... But that didn't flash either.

-Put the key in the ignition and turn it to position "I."
-Depress the trip odometer button on the instrument panel and hold it. Turn the ignition key to position "II."
-Wait about five seconds until you notice the service engine light flashing. After about the fourth flash, while still holding the trip button in, turn the ignition key to position "I."
-Release the trip odometer button and start the engine. The service engine light should now be off. If it's not, repeat the procedure.

Thanks,
Bert






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New CEL Reset [900]
posted by  MrNabisco  on Mon Jul 6 22:12 CST 2015 >
  • New CEL Reset [900]
    posted by  kittysgreyvolvo subscriber  on Tue Jul 7 02:40 CST 2015 >
  • New CEL Reset [900]
    posted by  Onkel Udo II subscriber  on Tue Jul 7 04:09 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.