Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

740 Fuel Pump Assembly With Banjo Fitting 700 1991

posted by  jd620 on  Mon Oct 26 17:49 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 07:42 CST 2014
[RELATED]

I am getting my daughters 740 ready for the Winter here in MN. I had it in the garage and noticed a spot of gas on the floor. Well, the fitting that returns gas to the tank on the Fuel Pump Assembly is rusted out. Also, the round plate containing the connections has a banjo fitting for the line running to the injector rail. I have a couple 940 assemblies but the do not have the banjo fitting. Is there a conversion I can get somewhere from banjo to push on connector like the 940s have?
--
Mine: 3-940s running, 2-740 and 1-940 parts cars, and 3 1959 John Deere 630s (1 parts), dtr1:3-940s, dtr2:1-740, 1=940






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 740 Fuel Pump Assembly With Banjo Fitting [700][1991]
posted by  jd620  on Mon Oct 26 17:49 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.