Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2009 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

940T Nissen Radiator trans cooler tubes misaligned! 900 1995

posted by  macs944T on  Mon Dec 7 12:58 CST 2015
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

The radiator plastic tanks on my 95' 940T are leaking. I bought a replacement Nissens radiator on-line. Size appears correct, but the upper transmission cooler fitting on the new radiator is about 1" high compared to the installed radiator.

The current radiator has a metal plug in that location (for the temp sensor for Regina FI). My car is a 95' with Bosch LH 2.4 FI, no temp sensor.

Several web sites show the same configuration radiator with trans fitting up higher, also just one hole/fitting in that upper location.

Has anyone installed that radiator with misaligned trans tubes? I may release the end of tube from existing radiator to see how it sits naturally - however it's a steel tube which I don't want to preload on a fitting in a plastic radiator tank.

Appreciate any insights or experience you can offer.

Thanks!

Mike
--
95' 944T - the kids car; previously known as macs245; Lars 88' 240, sold @ 250K mi. Then macs70GLT, Son of Lars 98' S70 sold @ 225K mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 940T Nissen Radiator trans cooler tubes misaligned! [900][1995]
posted by  macs944T  on Mon Dec 7 12:58 CST 2015 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.