Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2006 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Lower control arm bolt removal? 120-130 1967

posted by  uniberp on  Sat Feb 20 14:31 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Jan 31 07:08 CST 2011
[RELATED]

I kinda suspected this would happen...

The lower control arm bolt is frozen to the inner bushing sleeve.

Phil S's instruction at vclassics says "Undo the nut at the rear of the big bolt ...and remove the bolt. If you need to tap it out, put the nut back on partway so you don't damage the threads."

Tapping is not gonna do it. The bolt is froze to the inner sleeve and visibly bent as well. I'm glad it's not froze to the crossmember, but I wasn't planning on cutting the bolt.

Any hints on getting this old one out so I can finish this job today....?

-- or more likely ---

Where do I get new bolts, and why didn't I buy them before I started this?

Thanks


--
MPergiel, Walker, MI






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Lower control arm bolt removal? [120-130][1967]
posted by  uniberp  on Sat Feb 20 14:31 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.