Volvo RWD Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 4/2008

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

'92 240 turbo gauge wiring in non-turbo

posted by  rileyman on  Mon Apr 11 11:16 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 10 06:44 CST 2014
[RELATED]

Tried searching through the archives for an answer, but failed to find one...I have a set of the Turbo triple gauges that I want to install in my '92 240, non-turbo...Question is I want to replace the turbo gauge with a fuel economy gauge I have. Both have a nipple for the vacum hose, and the obvious 2 wires for the gauge light; but the turbo gauge appears to have addtional wiring terminals that I can't seem to figure out?...does the turbo gauge send a signal somewhere when maxed, or over boosted?...are there connections to these terminals that need to be adressed if the turbo gauge is removed from the triple cluster in order for the other two gauges to work?..







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.