OK - bendix was going out on my starter so I popped it out and took it back to Autozone for my lifetime warranty replacement. (Note here - The starter was kicking in but the bendix would not stay engaged long enough to start the car).

Slid the new (remanufactured) one in - and nothing, nada, not even a click. I took it back and had them run a test and sure enough it engaged properly and passed the test.

So I put it back in and still nothing. So I tested the wires and I'm getting a full 12+ on the power side (I had just charged the battery) - but the ignition wire shows no voltage when the key is engaged to start position. Slid it out of park into neutral and tried the ignition on both settings - - - still no voltage.


Any idea on what I could have done?

Thanks
Charles