Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

cruise control 200 1993

posted by  chessycreek on  Tue Dec 27 06:15 CST 2016
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have a 1993 240 with the late model cruise control (with the separate vacuum pump). The system would not longer hold speed and I did a vacuum check. Quickly found that the system would not hold a vacuum. The source of the problem was a hole worn in the rubber diaphragm of the throttle servo. I tried a ghetto fix by using a rubber inner tube patch. This only worked briefly. I think there is too much flex in the diaphragm for the patch seal to hold.

Does anyone have a source for a new servo? I have found the same part but for Jag or Land Rover and the brackets/linkages are different. I don't want to buy a part at Land Rover prices only to hack it up with no real guarantee of success. Thanks in advance.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New cruise control [200][1993]
posted by  chessycreek  on Tue Dec 27 06:15 CST 2016 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.