|
I have a 1991 Volvo 240 series that I completely removed the dashboard in and replaced the heater core and blower motor in back in early January. Upon completion of this task I noticed that the power locks do not work both when I use the key or push the lock actuator from inside the car, this previously did not happen prior to replacing the heater core. I'm guessing that I missed a connector or ground wire in reassembly, but upon inspection today I didn't notice anything out of place. Any ideas on where to look or what wires it could be? The Drivers door and Passengers door actuate with the power locks; however, the rear doors and tailgate do not. I have also cleaned and replaced the fuse related to power locks.
Thank you!
|