Volvo RWD 120-130 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 10/2001 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M41 - last quarter inch 120-130 1967

posted by  riverbend on  Sun Mar 26 16:16 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 15:29 CST 2014
[RELATED]

I'm putting the transmission back in my '67 220. It is hung up with a 1/4" gap between the gearbox and the bell housing. Since it is in that far the mainshaft must be started in the pilot bearing and the splines on the disk must be lined up.

Looking into the gap, it looks like the front seal retainer on the transmission isn't going into the hole in the back of the bellhousing. Are they a close fit or...? What do you think ?

Thanks

Greg





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New M41 - last quarter inch [120-130][1967]
posted by  riverbend subscriber  on Sun Mar 26 16:16 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.