Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Rusted Brake dust shields clogged my ABS sensors. can't find replacement shields. Drill/modify nonABS shields? 200 1992

Just bought a 1992 245 automatic. ABS warning light stays on. I've put in new rr brakes and parking brakes. I had new dust shields for that job.
Now front brakes. I have new calipers & pads, rotors are good to re-use. Front brake dust shields are 95% rusted into flaky dust which has clogged ABS sensor tip and grooves in reluctor ring. I am able to clean those thoroughly.
I'm trying to buy new front dust shields which have a hole for ABS sensor to pass thru to attach to hub. Haven't located on-line. I can call local Volvo dealer Monday.
I have shields for 240 without ABS. I can drill a neat hole in the right place. Before I remove everything to get access I'd like to know if this altered/drilled dust shield will fit. I have two in hand - Volvo Brake Dust Shield Front - Genuine Volvo 1272469 for 240, 242, 244, 245, 262, 264, 265 w/o ABS.

I can do the whole brake job this PM if the drilled parts will work. I have to be able to move the 245 tonite so I can get my truck out to work tomorrow.

ANY HELP & ADVICE GREATLY APPRECIATED ASAP!






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Rusted Brake dust shields clogged my ABS sensors. can't find replacement shields. Drill/modify nonABS shields? [200][1992]
posted by  DogsRGood subscriber  on Sun Apr 2 14:00 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.