Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 6/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedo sensor wiring 200

posted by  Trev29 on  Mon Oct 23 07:39 CST 2017
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 05:56 CST 2014
[RELATED]

My sister brought her '89-245 over stating that the speedometer-odometer wasn't working after gas fillup and reset of odometer.

I found wires hanging in the rear. Broken off from plug that goes into sensor. Removed plug, not enough wiring left to determine color. Rewired and guessed at blk and blu wire positions in plug. (50/50 chance of getting it right/wrong). Diagram in Haynes doesn't help. Since rear on stands, started car and put into drive. Speedo worked. Wrapped up.

But when I test drove, the speedo worked but the odo didn't. So flipped wires in plug. Speedo works but odo still doesn't. So did I damage the odo by having wires reversed initially?

Sister needs car so returning as is until car is available.
--
1980 245 Canadian B21A with SU carb, M46 trans, 3:31 dif, in Brampton, Ont.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Speedo sensor wiring [200]
posted by  Trev29  on Mon Oct 23 07:39 CST 2017 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.