Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Regina/REX ecu pinout information, and general tuning advice 900 1993

posted by  nullspacebasis on  Sun Jul 14 15:04 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello brickers,

I just got a 1993 944 n/a with the much-maligned Regina/REX ignition system. I plan on turbo-ing this car later, but the most common route is to swap for turbo ECUs (in the case of lh2.4) - this means that I will need to go standalone. I'd rather not spend the time to swap to lh2.4 because both systems are outdated and lack precision.

I plan on writing my own ECU - because I'm a college student and I don't have much money to blow on micro/megasquirt.

I'm looking for:
- Regina ECU pinouts, so I can make an adapter harness to my project
- General information on the sensor signals and voltages, i.e.:
- peak-to-peak voltage of fuel injector pwm signals
- duty cycle specifications
- MAP (for regina), MAF (for bosch), CPS, TPM, other sensor output ranges
- Boundary condition tuning
- MAP/MAF "limp home" modes (base tables)

If anyone has documentation or resources to study tuning theory I would greatly appreciate them.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Regina/REX ecu pinout information, and general tuning advice [900][1993]
posted by  nullspacebasis  on Sun Jul 14 15:04 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.