Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 9/2013 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Pressure, Maximum, System, Cooling 200

posted by  240s on  Thu Jul 18 16:40 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

Hello,

I have a 240 Volvo.
The head gasket is suspect as I've seen some white smoke at exhaust. Oil/water not mixed as seen on dip stick. I've done a few other test all showing no head gasket issues but want to be sure.

I rented a Cooling System Pressure Kit from local parts store.
The Volvo has a black cap 75kPa or ~11psi.

What is the maximum pressure the system can be pressurized to without inducing issues? ie blowing a hose or cooling gasket, etc...

I pumped the pressure up to 11psi and it is holding for 1 - 1.5 hrs no drop. I am tempted to go to 20 psi and test but don't wanted to cause leaks from over pressuring a system rate for 75kPa.

Any guidance would be great appreciated.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Pressure, Maximum, System, Cooling [200]
posted by  240s  on Thu Jul 18 16:40 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.