Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 8/2001 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

J-Type M41 Speedo Pinion gear drive housing identification 1800

posted by  DBS on  Wed Aug 28 05:42 CST 2019
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 17 19:33 CST 2014
[RELATED]

Fellow Brickboarders:

I need your advice. I recently bought a rebuilt J-type M41 tranny. When I was getting the parts together to complete the swap with the M40 I have on my 122s (I am posting this under 1800 since I am assuming that was where the late-type M41 may have come from), I was stumped when I saw the speedo drive. I took it out for better view. See pictures:





As you can see, the housing that holds the pinion gear has flat surface...no threads for the speedometer cable to be screwed on.

I showed that picture to the person who sold me the M41. He thought it was odd. While he is figuring that out, I thought perhaps one of you from the Brickboard would have an answer.

Many thanks in advance for your help/advice!

-DS





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New J-Type M41 Speedo Pinion gear drive housing identification [1800]
posted by  DBS  on Wed Aug 28 05:42 CST 2019 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.