Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

240 Clutch Differences 200 1987

posted by  Matt Henning on  Sun Jun 7 16:52 CST 2020
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS] [RELATED]

I have an 87 240 wagon with an automatic transmission. I'm planning on installing a m46. The m46 came from either an 84 or 85 240 turbo wagon. I have both the flywheel from the turbo and the flywheel from another 87 non-turbo. The flywheels appear to be identical. My question is in regards to ordering a clutch kit for my project. Are the splines on the input shaft of an m47 (which is what the 87 would have normally had) the same as the splines on the input shaft of the m46? Should I order a clutch kit for a car that would have had an m46, or a 1987 clutch kit. There appears to be two different kits.






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 240 Clutch Differences [200][1987]
posted by  Matt Henning  on Sun Jun 7 16:52 CST 2020 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.