Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 12/2024 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

1983 240 LH 2.0 engine harness 200 1983

uid 55's pic
posted by  john sargent on  Sat Aug 7 18:59 CST 2021
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Wed Oct 22 09:07 CST 2014
[RELATED]

Does anyone having the pin out (wiring diagram) for the engine wiring harness grey connector? It is on the firewall, to the rear of the intake manifold. There are only six wires used. I think the six are alternator field, oil pressure switch, starter solenoid, engine temperature, and coil power.

I have a good engine side connector from an LH 2.2 740T which I can use to build a replacement of this part of the engine wiring harness. The wires are so shot they ring (trace) together). Barton's site doesn't give a breakdown that I could find.

--
john






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1983 240 LH 2.0 engine harness [200][1983]
posted by  john sargent subscriber  on Sat Aug 7 18:59 CST 2021 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.