Volvo RWD 700 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 11/2016 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Exhaust Manifold Studs 700 1988

posted by  chucklee on  Tue Jan 25 10:01 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Sep 15 19:51 CST 2014
[RELATED]

I'm changing the exhaust manifold gaskets on my 1988 745t.

Three of the nuts came off OK, but five studs unscrewed from the head. Those threads look clean.

Probably because I didn't pay attention and use the correct (nickel) anti-seize on the nuts 13 years ago.

I'll use new studs and nuts. What, if anything, should I put on the studs going into the head. FAQ's suggest "high heat removable Loctite" Which Loctite would be best for this? Or maybe some other 'stuff?'

And, how tight should the studs be in the head?

Thank you, chuck

--
1988 745t 175k mi, 1995 945 148k mi






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Exhaust Manifold Studs [700][1988]
posted by  chucklee subscriber  on Tue Jan 25 10:01 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.