Volvo RWD 1800 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2024 1800 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

1972 1800ES Rebuilding Oil Pump 1800

posted by  Gary D on  Mon Mar 28 10:31 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Jul 7 18:08 CST 2013
[RELATED]

I am working on the restoration of my '72 1800ES, and starting to turn my attention to the engine. One item on the list is to disassemble, clean up, inspect, and reassemble the oil pump. Pump was a bit full of gunk after sitting idle for a few decades. Once I get it cleaned up and inspected, what torque should I be using for the 4 bolts that hold it together? Have not found any information on this, and do not want to over tighten the bolts, which can cause damage to the aluminum castings. Nor, under tighten causing leaks and potentially have the pump come apart while driving.
--
Gary D






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 1972 1800ES Rebuilding Oil Pump [1800]
posted by  Gary D  on Mon Mar 28 10:31 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.