Volvo RWD 200 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

to long cranking over before starting 200 1988

posted by  joekidd on  Wed Sep 7 15:15 CST 2022
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 10:54 CST 2014
[RELATED]

The first start of the day takes too long to fire up. The second start is normal if its done in under an hour or so it seems. So my question is what holds the pressure in the rail. The FPR was replaced a year ago as it was leaking with an aftermarket regulator ( standard motor products) from the rock as the OEM Bosch unit is now unobtainium . The fuel pump check valve was also replaced when the fuel filter was replaced as preventative maintenance . There is no fuel in the vacuum line of the FPR. It seems like the FPR has failed already.



Thank you






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New to long cranking over before starting [200][1988]
posted by  joekidd  on Wed Sep 7 15:15 CST 2022 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.