Volvo RWD 444-544 Forum

INDEX FOR 10/2025(CURRENT) INDEX FOR 1/2022 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Gas tank filler neck squished 444-544

posted by  someone claiming to be PV Guy on  Fri Dec 8 18:40 CST 2023 [RELATED]

All:
I restored my '62 PV544 and when re-fitting the filler neck extension at the top of the gas tank I noticed it was squished about 1/3rd of the round pipe shape. I went ahead and connected the rubber sleeve to the bent pipe and the filler neck. But apparently there's no way the rubber sleeve can compress tightly enough against the squished pipe to seal it, and now fuel leaks out of the gap between the rubber sleeve and the squished pipe and onto the ground when I fill up the tank. Also if the tank is pretty full, it sloshes out of the connection when driving. Not good!
So, what to do? Can the pipe extension at the top of the tank be straightened back into a nice circle if the tank is removed?
Or do I have to buy a brand new tank? The tank is good, no internal rust or scale.
Help! Anybody have an idea?






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Gas tank filler neck squished [444-544]
posted by  someone claiming to be PV Guy  on Fri Dec 8 18:40 CST 2023 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.