Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2005 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

More ?? on 960 Brakes 900 1996

First of all fellow "RWDers", thanks alot for the previoushelp on my brake rotor problem. I've decided to replace the front rotors myself; it'll probably be a challenge for someone who's biggest previous auto mechanics accomplishment was using a strobe light (long time ago).

A couple of new questions. First, the service manual for my 960 brakes says I need to check for lateral hub runout, using tool kit 5418-2, when replacing rotors due to "resonance." Is this icing on the cake, or am I asking for trouble not doing it? I suspect tool kit 5418-2 might cost quite a bit.

Second question: Brake fluid meeting DOT spec "4+" is recommended for this car. I've found DOT 3, 4 and 5, but no "4+" is DOT 4 OK? Also, it says not to mix fluid from different manufacturers- how critical is that? I don't want to cut too many corners, but I need to know what's really necessary.

Thanks again for the earlier help.

Steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New More ?? on 960 Brakes [900][1996]
posted by  someone claiming to be Steve Balone  on Mon Nov 6 10:29 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.