Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

vacuum connections 200 1979

posted by  someone claiming to be David Wood on  Sun Nov 26 03:20 CST 2000 [RELATED]

I need to pose a request for advice on the proper vacuum connections for a '79 245 with k-jet injection. I have both older and newer models, but no 79 to look at. There is a fitting on the throttle body, the distributor, the charcoal can, the distributor, and also a small can on the firewall that has two 5/32 stems coming out, along with an electical fitting and a small plastic cap on the other end. I mostly need to know if the distributor gets vacuum from the intake manifold, or from the throttle body fitting.

Thanks for any advise.

David






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.