Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 3/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Cam shim question 200 84

posted by  someone claiming to be Hank Auderer on  Mon Dec 4 14:56 CST 2000 [RELATED]

Cousins,

I got quite a few cam adjustment shims from the Pick'nPull last weekend in preparation for a few valve adjustments. The Bentley manual says to put the "number" side down. Does anyone know if you can flip the shims to get "virgin" surfaces? Or, to put it another way, is the hardening on both sides?

Some of the shims I got have some wear marks (actually more like stains - the surface seems to be smooth and has no pits...).





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Cam shim question [200][84]
posted by  someone claiming to be Hank Auderer  on Mon Dec 4 14:56 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.