Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

O2 sensor 200 1983

posted by  someone claiming to be Jim Haffner on  Tue Dec 5 09:23 CST 2000 [RELATED]

Hi, I have an '83 244 T car and I am replacing the exhaust manifold with an '88 740 T manifold. Have not been able to find a "good" 240 T manifold so I am going with the 740. The problem I am having is finding an

18x1.5 mm nut or "bung" to fit the O2 sensor. I need to drill a hole in the down pipe and weld on this nut/bung if I can get one. So has any one done this and if so where did you get the nut/bung for this? I can not find one and I am in NEED of it. If anyone has any or can get any PLEASE let me know. I need 3 if possible. Any help in this would be appreciated.

Thank you,

Jim JMandJD@juno.com





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New O2 sensor [200][1983]
posted by  someone claiming to be Jim Haffner  on Tue Dec 5 09:23 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.