Volvo RWD 900 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2009 900 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

O2 Sensor? 900 1993

posted by  someone claiming to be Manish Patel on  Mon Jan 15 11:55 CST 2001 [RELATED]

My "check engine" light came on and I noticed hesitation/stuttering upon heavy or sudden acceleration. When I checked for codes I got 2-3-2, 2-3-1 and 2-2-1 (all having to do with "mixture too rich/lean"). I erased the codes but the "check engine" light came back on immediately after re-starting the engine. This time the codes were 2-3-1 and 2-2-1. Again I cleared them and re-started the engine, the same codes returned immediately.

My limited knowledge tells me that I should start by replacing the O2 sensor and see if that fixes the problem. The only thing is that the dealer wants $340 (cdn) for an O2 sensor. The other thing is that the ECU did not flash the code for a malfunctioning O2 sensor and I don't want to spend that kind of money to find out that it was some other problem.

Any advice would be greatly appreciated!

Manish

manish@acscanada.com





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New O2 Sensor? [900][1993]
posted by  someone claiming to be Manish Patel  on Mon Jan 15 11:55 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.