Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

260 B230FT & ABS Conversion ???? 200 1983

posted by  someone claiming to be Matt on  Mon Mar 5 03:04 CST 2001 [RELATED]

I am about to start doing up a 260. I will be striping it down to a bare shell and totaly disassembled the suspension.

Firstly, I'll be puting in a B230FT and M47 box. I am presuming that this will go straight in inplace of the V6 setup, that is if the mount holes are in the same place. I know I'll also have to use the rest of the stuff from the turbo engine bay (eg. radiator, intercoler, computers) but that's not a problem. Are there any major problems with this conversion?

Secondly, is it possible to fit an ABS system from a 93 model to my 83. I was planing on reconing the braking system with all new lines, hoses, disc, calipers , everything but fitting ABS will be even better and this is the time to do it. So what is involved in converting from the conventional brakes to ABS?

Any help with these two areas will be much apperciated.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 260 B230FT &amp; ABS Conversion ???? [200][1983]
posted by  someone claiming to be Matt  on Mon Mar 5 03:04 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.