Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2010 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Total end link failure? 200 84

posted by  someone claiming to be David Wein on  Mon Mar 5 08:19 CST 2001 [RELATED]

My wife was driving the 84 242T yesterday and reported an "on its last legs" sound from the suspension. I took it out today and noticed that both front end links appear to have completely failed. I run a 25mm IPD sway bar which I installed a couple of months ago with the associated new upper bushings. On both endlinks I see that the poly bushing that is supposed to sit underneath the swar bar is instead resting down near the control arm. The sway bar itself is pivoting / jammed on what is left of the ring which is supposed to support the lower bushing. The upper nuts and bushings are still in place, but the there is no tension on the sway bar itself. This all results in a clunk that is, well let's say, noticable. Has anybody ever heard of end links failing link this?

And, yes, I just ordered my pair of Nick Choy End Links.

-Dave





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Total end link failure? [200][84]
posted by  someone claiming to be David Wein  on Mon Mar 5 08:19 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.