Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2007 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

brickboard for dummies/intake install 200 83

posted by  someone claiming to be RR on  Sun Mar 11 07:17 CST 2001 [RELATED]

Hi guys,

Im putting back together my 242glt and its time for the intake.However I hav figured out where most of the tubing goes,but a couple of nipples have me stumped.

The furthest two nipples on top of the #4 cyl intake to port side.Cant figure where these go.The are the bigger nipples.Also there are twin nipples on the starboard side of the throttle housing.The small one back goes to the distributor,but what about the front one?

Finally,does my car have an EVAP cannister?Cant find one

Thanks

RR





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New brickboard for dummies/intake install [200][83]
posted by  someone claiming to be RR  on Sun Mar 11 07:17 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.