Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Injector O-Rings 200 84

posted by  someone claiming to be Robert S. on  Sat Mar 31 00:03 CST 2001 [RELATED]

This weekend's project is to replace the Injector o-ring seals on my 84 245Ti (K-Jetronic). Have had a slight vacuum leak around #3 injector and occasionally it spits grey/white smoke from #3 when I shut it off.

First time I've done this; any do's/don'ts? The injector seal "kit" I bought contains eight pieces; four thick o-rings and four thin ones. Thanks, Robert

84 245 GLTi





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Injector O-Rings [200][84]
posted by  someone claiming to be Robert S.  on Sat Mar 31 00:03 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.