Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Wire harness FYI 200 89

posted by  someone claiming to be Haroon on  Sat Apr 14 15:54 CST 2001 [RELATED]

On an 89 with 175K found the wire harness (little above the oil trap) being worn down by the rear engine lift ear (bracket for pulling engine out). This is connected towards the firewall with the intake manifold studs. Caught this in time, removed the support bracket and retaped the wire harness. The harness was probably rubbing against it and wore down the protective plastic and began 'chewing' away one of the wires. Permently removed the lift bracket.

Trend?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Wire harness FYI [200][89]
posted by  someone claiming to be Haroon  on Sat Apr 14 15:54 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.