Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Any Success Gluing Interior Plastic Cracks? 200 1990

posted by  someone claiming to be Paul Despres on  Mon May 7 04:40 CST 2001 [RELATED]

Has anyone had any success gluing interior plastic that has cracked? The bottom of the back side of the center console on the 240 has cracked below the ash tray, as well as the bottom of the door pillar trim piece. I would think Testors model glue would work, if that stuff still exists in this country. I have SuperGlue, Gorilla Glue (polyurethane), 3M Emblem Adhesive in the shop now, but I don't think these are really meant for plastic-to-plastic bonding.

I am interested in a strong repair cuz I'd like to keep the pieces from falling off of this car. Thanks for any advice.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Any Success Gluing Interior Plastic Cracks? [200][1990]
posted by  someone claiming to be Paul Despres  on Mon May 7 04:40 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.