Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 11/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

brake master cylindar 200 1979

posted by  someone claiming to be john geoghegan on  Sun Jun 3 14:21 CST 2001 [RELATED]

hey to all you know it alls out there, i revently replaced my brake pads a few calipers and my rear rotors, after which i bled the system and all the usual check for leaks. before i did the brake work the brakes werent great but the were firm. now the brake pedal gets tight when the engine is off like it should , but when i turn the engine on and the brake booster kicks in the pedal gets soft. it takes a very light tight and i have to push it gradually but it stops tight. is my master cylindar leaking ? no visible signs... and when they say abs do they mean anti lock breaks or by my having a brake booster do i have abs? anyway let me know what you think. thanks - john





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New brake master cylindar [200][1979]
posted by  someone claiming to be john geoghegan  on Sun Jun 3 14:21 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.