Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2001 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Frozen Calipers 700 87

posted by  someone claiming to be Todd Davis on  Sat Nov 3 17:35 CST 2001 [RELATED]

I noticed that my brakes on my 745T where making a grinding noise and decided it was time to service the brakes. I began to service the rear brakes and noticed that the passenger side was ok but the drivers side was worn down to the metal. I was able to push one the the pistons in on the pass side and none on the other side. I went to home depot and bought a lrge C clamp and was able to push the pistons back in. That is as far a I got today. I am wondering if there are any rebuild kits for the 745 rear brakes. I checked IPD and all that they have is the ones for the 200 series ATE. Is there any thing that I can do to loosen up the rear calipers or fix them?

Thanks

Todd Davis





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Frozen Calipers [700][87]
posted by  someone claiming to be Todd Davis  on Sat Nov 3 17:35 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.