Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2002 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Fuel Injection heads vs N/A Heads 120-130 1965

posted by  someone claiming to be BrettSutherland on  Thu Nov 8 09:52 CST 2001 [RELATED]

Hi again gang .... well this morning I picked up the "New to me" B20 engine that I plan on installing in my 122. Apparently the block itself is a 1969 variety but it is fitted with a fuel injection head with the injection ports sealed with silicone sealant. I have been told, by someone who should know, that the valve sizes are larger in the FI head than the ones in the N/A head. Is this true and what is the compression ratio comparison between the two heads? .... In other words, should I have my N/A head gone over and install it when we put in that engine ... or is there a performance gain to be had by using the FI heads with the SUs ?

Old Volvos never die ... they just become COOL !!!!





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Fuel Injection heads vs N/A Heads [120-130][1965]
posted by  someone claiming to be BrettSutherland  on Thu Nov 8 09:52 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.