Can anyone tell me if i'm headed in the right direction? My OD and cruisecontrol go in and out at similiar times. I think now there is no correlation between the two b/c I cleaned up the #1 fuse and buffed the contacts so it can't be the fuse. So i drove it on the highway and pushed the OD button and it wouldn't come on. Earlier I pulled out the OD relay behind the glove box and removed the housing. I closed the relay circuit at 60 mph and the OD engaged. I did this several times and it worked fine. So then I tried the switch on the stick and it seemed to work fine, but then it wouldn't engage. I suspect the wiring in the stick itself and not the switch because I beat around the rubber boot where the wires are and it didn't work anymore. with this kind of cooky logic does is seem reasonable that the problem is probably the wires running down thru the stick?

thanks,

victor evans