Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 9/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

What exactly constitutes 'bad' engine mounts? 200 1983

posted by  someone claiming to be Isaac Babcock on  Thu Nov 15 12:22 CST 2001 [RELATED]

My shifter (M46) has been tilted 2" to the right of where it should be for a while now. I noticed last time I changed the oil that my engine is listing so far to the right of the car that the oil filter was literally resting on the engine mount bracket for support. This leads me to believe that my mounts are bad. Funny thing is, they don't look cracked, and they're definitely not broken in half. Is it possible for one or both of them to be just stretched too far or soft and smashed so that they deform under the weight of the engine so as to cause this condition? They look fine to me! The tranny mount looks fine as well. Any suggestions? Thanks a lot for all of the help.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New What exactly constitutes 'bad' engine mounts? [200][1983]
posted by  someone claiming to be Isaac Babcock  on Thu Nov 15 12:22 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.