Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2005 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Voltage stabiliser 200 80

posted by  someone claiming to be Graeme Sproul on  Thu Jul 19 18:39 CST 2001 [RELATED]

Guys,more along the lines of a discussion than a problem,Im interested in your ideas.

A few months ago after registering high temp and changing everything from the gauge to the waterpump I found the problem to be the voltage stabiliser which hides behind the temp gauge and fuel gauge.It goes and both these gauges read high.

Last week the same behavior commenced again.Replaced the stabiliser and all is sweet.

Now was it a coincidence that the original and the 2nd s/h unit both died or is there perhaps an underlying fault.

Could a jump start,voltage regulator, or even an alternator, or short cause the unit to peg out?

What do you think?





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Voltage stabiliser [200][80]
posted by  someone claiming to be Graeme Sproul  on Thu Jul 19 18:39 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.