Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2000 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: ECU 200 89

Yong,

In 1989 Volvo used a crankshaft sensor that is mounted at the back of the

engine on top of the bell housing. It detects crankshaft rotation and uses this info. for timing and fuel delivery. The ignition dist. has no pickup in it for

this reason. Because the Fuel ECU is energized by the ignition ECU, if the speed pick up is bad the ignition ECU will not detect crank rotation, therefore, the fuel ECU will not turn on the fuel pumps. Hense no spark and no fuel. There are ways to check the speed pick up. The quickest way is actually with your eyes. The most current p/n 3547847 has a white band

painted around the wire, if it's a yellow band , it's an old p/n.

Ted

Stillman Volvo







<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.