Dear Chris,

I recently changed the window seals on my '71 1800E, they are the same as the ES. I got them at RPR Co. Inc. 599 San Pablo Ave, Albany, CA. 94706.phone 510 524 7200.Fax 510 524 7409 Catalog #688540 is the door guide channel which goes in the back of the vent frame and inside the door at the rear. I can't remember how much they were but they weren't real expensive. You will need three of them, one for each of the vent frames and one to cut in half for the rear channel. RPR also has the scraper seal that goes on the outside trim strip catalog #668258. They do not have the inner wiper seal which is the fuzzy strip that goes on the inner garnish moulding at the top of the door panel. I found a decent substitute at Metro Moulded Parts, Inc. 11610 Jay Street, P.O. Box 48130, Minneapolis, MN. 55448 phone for questions 612 757 0310, orders 800 878 2237 Fax 612 757 7228. catalog # WC 5-48 $12.15 for a 48" piece that I had them cut in half to save on shipping. This stuff has the black cloth on the top like the original. Another source for all of this is Yankee Trading Co. 991 Bushkill Drive, Easton, PA 18042 who used to sell a kit of all the strips in that area. If you are going all out, you might want to have the inside window sills recovered. I had mine done by The New Dash Group, 116 N. Roosevelt, Suite 126, Chandler AZ. 85226 phone 602 940 1910 about five years ago. They did an outstanding job, but it cost $90 for the pair with shipping and all. Hope this is of some help.

SWDSH Fe