Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 1/2003 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: AMM Calibration 700 1989

posted by  someone claiming to be abe crombie on  Mon Aug 9 11:39 CST 1999 [RELATED]

Volvo uses the same MAF sensor for turbo and non-turbo on 4 cylinders. They don't make it so hard. It's more a case of using a MAF sensor that falls into the needed CFM range. LH 1, 2 and 2.1 use the same #, LH 2.2 4 cyl use the same #, LH 2.2 6 cyl uses another # (it is a larger in diameter), LH 2.4 models use another #. The Motronic 1.8 inline six uses yet another #.

All but the 2.4 and M1.8 versions have the feedback potentiometer for trimming the baseline injector duration in idle program.

The listed ones above are all hot wire versions.

LH 3.1, 3.2, and Motronics 4.3 and 4.4 have the hot film version.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Re: AMM Calibration [700][1989]
posted by  someone claiming to be abe crombie  on Mon Aug 9 11:39 CST 1999 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.