Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: Hall Effect Sensor 200 82

posted by  someone claiming to be abe crombie on  Mon Aug 16 13:17 CST 1999 [RELATED]

The hall sensor outputs a ground to the 5V reference signal out of ign ecu. If you have a 5V signal, a 12V signal, and a ground at the harness plug and then you jump between the ground and the 5V pin and you don't get one spark from coil and one brief activiation of fuel pump relay (and pumps) then look to ign ecu. If the jumper accomplishes those things then fetch a new hall sensor.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.