Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2001 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

oil pressure sender thread size. 200 1983

posted by  someone claiming to be Simon Page on  Mon Jul 30 08:56 CST 2001 [RELATED]

I want to add an oil pressure gauge to my 245 rather than just relying on the idiot light. I don't want to spend the $115 volvo charges for the sender with idiot light tap. I found that egauges.com has lots of VDO senders for a 5 bar gauge (about $35). I just need to know the thread so I can order up a sender and some fittings (so I can tee in the idiot light sender).

Also another oil related question...will the oil cooler adapter that is located under the oil filter from a 230 turbo motor fit my 23? There is a 740 turbo with all the oil cooler stuff at my local P-N-P. Although, the 740 and the 245 do not have the same under hood layout..It seems that the hoses are long enough that I sould be able to plumb the cooler in an appropriate place.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New oil pressure sender thread size. [200][1983]
posted by  someone claiming to be Simon Page  on Mon Jul 30 08:56 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.