Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

nuts on rear sway bar 200 1987

posted by  someone claiming to be Brendan on  Tue Jul 31 05:49 CST 2001 [RELATED]

I just took the tires off and realized I'm either gonna need a deep 19mm socket or a impact wrench or both. Are these things possible to take off by hand with a 3/8 drive 19mm deep socket or are they really torqued on there?

Probably the best thing is going to be some closed 6 point wrenches and some heat instead of this silly 3/8 socket wrench. "I knew I should have bought that set of wrenches yesterday" he says as he smacks himself.

I'm all the way out in MD away from my shop in CA with a few tools here and there.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New nuts on rear sway bar [200][1987]
posted by  someone claiming to be Brendan  on Tue Jul 31 05:49 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.