Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Who has replaced ALL the rear bushings? 200 1987

posted by  someone claiming to be Jim on  Sun Sep 17 13:25 CST 2000 [RELATED]

If bricksters stuff rope into cylinders to avoid buying the special service tool to remove the crank pulley bolt, maybe someone out there has changed his rear end bushings with 'home made' tools without resorting to a 40T hydraulic press.

I can hand carry parts to a shop to have the smaller piece bushings pressed out & in. BUT I don't want to pull out the whole rear end to get those two big bushings out & in.

Anyone done those big bushings without a hydraulic press?

Jim





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Who has replaced ALL the rear bushings? [200][1987]
posted by  someone claiming to be Jim  on Sun Sep 17 13:25 CST 2000 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.