Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 10/2004 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Turn Signal Switch w/Cruise Control 200 84

Finally took delivery of my 84 Ti wagon after serious front end collision work. All is well except high beams don't work, along with cruise control. Body shop and I both suspect the switch, since it doesnt "click" when toggled. Road test shows cruise doesnt work, either. Quick continuity checks suggest it is the switch.

Only thing is, switch wasn't involved in the collision, although it could have finally shelled out while sitting in shop dust and grime for six weeks. Is there a relay I should be looking at as well? All fuses check OK; low beams work. Turn signals also work.

Any advice/experience appreciated. Thanks

Robert

84 245 GLTi

88 245 DL






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Turn Signal Switch w/Cruise Control [200][84]
posted by  someone claiming to be Robert S.  on Fri Aug 10 10:26 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.