Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2015 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Distributor tool 700

posted by  someone claiming to be John Sargent on  Fri Feb 9 12:34 CST 2001 [RELATED]

There is reference in the distributor section of the 700/900 FAQ to an IPD distributor tool, which is noted as no longer available. The distributor tool is a fixture used to hold the cam driven distributor (from the B230F and B230FT engines) while driving the pin out. The pin is sometimes very hard to drive out, and the fixture is useful. The tool IPD marketed was not made by them, but by Chris Bogue of Mercy Motors, 246 SW 2nd, Canby, OR 97013. Telephone 503-263-2766. e-mail boguejr@integrityonline.com. Current price is $15 plus shipping. For those who have not seen earlier posts, the seal is Transcom #12X20X4TC or Honda #91205-KF0-003. The wire hold down is Volvo part number 1346794, the Hall effect wire connector is Volvo #1346793, the Hall effect pick up is Volvo #1346792. There is lots of information in the 700/900 FAQ on replacing these parts.






<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.