Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 12/2006 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

3rd seat installation instructions 200 1987

posted by  someone claiming to be Michael Cryne on  Sat Sep 1 01:37 CST 2001 [RELATED]

Help,

I have purchased a 3rd seat for my 245 and need further details regarding its installation. Does anyone have a copy of factory instructions and/or diagrams ? I am particularly interested in: 1. The location of the lower fastening point for lap belts (I believe holes must be drilled in the wheel wells, but where?) 2. The installation of the seat lock down mechanism located in a recessed hole in deck, does this get drilled in and nutted from behind?, is there a trim for the small retangular hole in carpet?. 3. How exactly does the spring loaded mechanism on the back of the 3rd seat function. It appears to lock the 3rd seat to the back seat. Should there be some sort of metal bracket on the back of the back seat for the locking barbs to clip on? Any and all information is appreciated as I would prefer to perforate the bodywork of this as yet unrusted bucket the minimal # of times required for a proper installation. Thanks in advance for any info. Mike





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New 3rd seat installation instructions [200][1987]
posted by  someone claiming to be Michael Cryne  on Sat Sep 1 01:37 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.