Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

broken bleeder screw.... am i screwed? 200 1984

posted by  someone claiming to be drew cappabianca on  Wed Oct 17 10:36 CST 2001 [RELATED]

alright, so i finished the strut/balljoint/tierod end job... got the whole thing back together sucessfully... then i went to bleed the brake system.. the bleeder screw breaks... my friend decides to try and drill the screw out.. we havent done an damage to the caliper.. yet, as we were unsucessful at drilling out the rest of the screw.. but how does one get the screw out? do i need to get a new caliper? i sure hope not... eck.... thanks for all advice... it's been very useful!

-Drew





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New broken bleeder screw.... am i screwed? [200][1984]
posted by  someone claiming to be drew cappabianca  on Wed Oct 17 10:36 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.