Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2005

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

WIRING HARNESS REPAIR

posted by  Robert S. on  Sun Dec 30 01:45 CST 2001
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 21 05:48 CST 2014
[RELATED]

Wiring harness on my 84 245 Ti needs the 8-pin rectangular gray-color connector block at the firewall replaced. This is the harness that goes into the cabin on the passenger side and feeds the CIS among other things in the engine bay. Intend to splice in some new wires at the same time to fix the rot problem. It is the engine-side of the connector and wires that need to be replaced.

I cannot find a supplier of the connector block and the pins. Volvo dealer is no help.

Anyone done a similar repair out there?

Thanks

Robert
84 245 Ti






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New WIRING HARNESS REPAIR
posted by  Robert S. subscriber  on Sun Dec 30 01:45 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.