Volvo RWD 200 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 5/2002 200 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Engine runs the same (crappy) with or without #3 plug wire and or injector wire, WHY!!?? 200

posted by  someone claiming to be Steve on  Mon Jan 14 10:00 CST 2002 [RELATED]

There is absolutely no change in engine (b23ftI) sound or speed when I completly remove the #3 cylinder plug wire, the exact same is true when I remove the #3 injector wire. So I did the logical things pulled the brand new spark plug and checked for spark... tons of spark! Pulled the fuel rail to check for a malfunctioning or clogged injector... Wow was I ever surprised to see 4 perfectly atomized streams of fuel coming from all injectors. Then I Checked the cylinder compression... 65psi. So why is it that my engine is running on only 3 cylinders? I am sure if #3 came back to life it would run good again.

P.s. There is NO coolant or oil consumption

Please help!

Thank you!

Steve






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Engine runs the same (crappy) with or without #3 plug wire and or injector wire, WHY!!?? [200]
posted by  someone claiming to be Steve  on Mon Jan 14 10:00 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.